UV DTF Decals

UV DTF Transfer Application Instructions

Recommended Surfaces:
Glass, acrylic, plastic, metal, stainless steel, finished wood (smooth only)

Steps

1. Clean the surface
   Wash with soap and water or wipe with alcohol. Make sure it’s completely dry and free of dust, oils, or residue.

2. Peel
   Slowly peel the transfer away from the backing, keeping the design on the clear carrier film.

3. Apply
   Place the transfer onto the surface. Once it touches, it cannot be repositioned, so align carefully.

4. Squeegee
   Firmly rub the entire design using your fingers, a scraper, or a squeegee to activate the adhesive.

5. Remove Film
   Slowly peel off the clear carrier film. If any part lifts, lay it back down and squeegee again.

6. Final Set
   Let the design cure for 24 hours before washing or heavy handling.

Care Instructions

• Hand wash only

• Do not soak

• Not dishwasher or microwave safe

• Avoid extreme heat

• For best results, wait 24–48 hours before use